Re[2]: lug-bg: проблем с ifconfig
- Subject: Re[2]: lug-bg: проблем с ifconfig
- From: Васил Петров <v450@xxxxxxx>
- Date: Sun, 21 Aug 2005 08:14:33 +0400
- Delivered-to: lug-bg-list@xxxxxxxxxxxxxxxxxx
- Delivered-to: lug-bg@xxxxxxxxxxxxxxxxxx
-----Original Message-----
From: Ivan Petrushev <ivanatora@xxxxxxxxx>
To: lug-bg@xxxxxxxxxxxxxxxxxx
Date: Sat, 20 Aug 2005 10:31:16 +0300
Subject: Re: lug-bg: проблем с ifconfig
>Мисля че проблема ти наистина е в синтаксиса, за първи път виждам да
>се ползва така с inet. Пробвай си нормално с:
>ifconfig eth0 192.168.0.1 netmask 255.255.255.0 up
>
>
>> >>> ifconfig eth1 inet add 192.168.0.1 netmask 255.255.255.0 up
>
ifconfig eth0 inet x.x.x.x работи, то отстана и да не работи, проблема е че такова нещо като ifconfig interface address family add не може.
Address Families
If the first argument after the interface name is recognized as the
name of a supported address family, that address family is used for
decoding and displaying all protocol addresses. Currently supported
address families include inet (TCP/IP, default), inet6 (IPv6), ax25
(AMPR Packet Radio), ddp (Appletalk Phase 2), ipx (Novell IPX) and
netrom (AMPR Packet radio).
|