Re: lug-bg: тв. тунер

[Ivaylo Toshev <ivaylo.toshev@xxxxxxxxx>]

Ами според мен , проблемчето е тук:

saa7133[0]: subsystem: 1043:4845, board: LifeView FlyVIDEO2000 [card=3,insmod 
option]
виж какви други още могат да бъдат card= , и пробвай ръчно да дигаш модула с insmod , разбира се ако не стане, rmmod и после следваща итерация с insmod  с card= друго число и дано го налучкаш.


Между другото пича с KNOPIX-а дето го е подкарал, нека да погледне при него dmesg какво казва за този параметър: card= 


Атанас Мавров написа:
> Здравейте пак,
>
> това е намерено
> #>dmesg
>
> saa7133[0]: found at 0000:00:09.0, rev: 208, irq: 11, latency: 32, mmio: 
> 0xef001000
> saa7133[0]: subsystem: 1043:4845, board: LifeView FlyVIDEO2000 [card=3,insmod 
> option]
> saa7133[0]: board init: gpio is 40000
> saa7133[0]: there are different flyvideo cards with different tuners
> saa7133[0]: out there, you might have to use the tuner=<nr> insmod
> saa7133[0]: option to override the default value.
> input: saa7134 IR (LifeView FlyVIDEO20 as /class/input/input1
> Real Time Clock Driver v1.12
> saa7133[0]: i2c eeprom 00: 43 10 45 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
> saa7133[0]: i2c eeprom 10: 00 ff e2 0f ff 20 ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 88 ff ff ff ff
> saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 40: ff 22 00 c2 96 ff 02 30 15 ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> tuner 1-004b: chip found @ 0x96 (saa7133[0])
> tuner 1-004b: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
> saa7133[0]: registered device video0 [v4l2]
> saa7133[0]: registered device vbi0
> saa7133[0]: registered device radio0
>
> Ако пробвам с  tvtime-scanner
> ...
> Checking  ... MHz:  - No signal
>
>