From: Атанас Мавров / Atanas Mavrov <bugar@xxxxxxxxxxxx>
To: lug-bg@xxxxxxxxxxxxxxxxxx
Sent: Monday,
December 8, 2008 7:54:28 PM
Subject: [Lug-bg] RAID и debian
Здравейте,
имам следния проблем, ще се радвам ако някой може да помогне - става въпрос за
RAID контролер INTEL 82801HR/HO/HH (дъното е supermicro X7SBL-LN2). Опитвам
се да използвам хардуерния RAID, но нещо не мога да се справя. Ето какво съм
пробвал до сега - debian netinstaller (4.0r5). От BIOS -а имам две възможни
настройки за RAID -а INTEL/Adaptec. И така - с INTEL създавам RAID (1)
масив, инсталацията започва, но когато стигна до разделянето на исковете,
вместо един диск се виждат двата. Разбира се мога да разделя единия и да
инсталирам ОС, но след като
рестартирам се изписва само GRUB и толкова, но
така или иначе това не е решение. Ако се опитам да използвам Adaptec изобщо
не намира дисковете.
Накрая за да тръгне GRUB -а изкарах единия диск от масива и инсталирах ОС,
сложих и софтуерен RAID, ще прикача и dmesg -а ако може да помогне.
Благодаря Ви и поздрави!
Linux version 2.6.18-6-686 (Debian 2.6.18.dfsg.1-23) (
dannf@xxxxxxxxxx) (gcc
version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Oct 13
16:13:09 UTC 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000096000 (usable)
BIOS-e820: 0000000000096000 - 00000000000a0000
(reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe70000 (usable)
BIOS-e820: 000000007fe70000 - 000000007fe7c000 (ACPI data)
BIOS-e820: 000000007fe7c000 - 000000007fe7f000 (ACPI NVS)
BIOS-e820: 000000007fe7f000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f69c0
On node 0 totalpages: 523888
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 294512 pages, LIFO batch:31
DMI present.
ACPI: RSDP (v002 PTLTD
) @ 0x000f6990
ACPI: XSDT (v001 SHIMAS SDS-ONE 0x06040000 LTP 0x00000000) @ 0x7fe730b9
ACPI: FADT (v003 INTEL 0x06040000 PTL 0x00000002) @ 0x7fe7b440
ACPI: _MAR (v001 Intel OEMDMAR 0x06040000 LOHR 0x00000001) @ 0x7fe7b534
ACPI: TCPA (v001 Intel 0x06040000 PTL 0x0000005a) @ 0x7fe7b564
ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x7fe7b596
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x7fe7b5d2
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x7fe7b63a
ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x7fe7b662
ACPI: ERST (v001 SMCI ERSTTBL 0x06040000 SMCI 0x00000001) @
0x7fe7b6b2
ACPI: HEST (v001 SMCI HESTTBL 0x06040000 SMCI 0x00000001) @ 0x7fe7bc42
ACPI: BERT (v001 SMCI BERTTBL 0x06040000 SMCI 0x00000001) @ 0x7fe7bcea
ACPI: EINJ (v001 SMCI EINJTBL 0x06040000 SMCI 0x00000001) @ 0x7fe7bd1a
ACPI: SLIC (v001 SHIMAS SDS-ONE 0x06040000 LTP 0x00000000) @ 0x7fe7be8a
ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20050228) @ 0x7fe749f8
ACPI: SSDT (v001 PmRef Cpu7Tst 0x00003000 INTL 0x20050228) @ 0x7fe74952
ACPI: SSDT (v001 PmRef Cpu6Tst 0x00003000 INTL 0x20050228) @ 0x7fe748ac
ACPI: SSDT (v001 PmRef Cpu5Tst 0x00003000 INTL 0x20050228) @ 0x7fe74806
ACPI: SSDT (v001 PmRef Cpu4Tst 0x00003000 INTL 0x20050228) @ 0x7fe74760
ACPI: SSDT (v001 PmRef Cpu3Tst 0x00003000 INTL 0x20050228) @ 0x7fe746ba
ACPI: SSDT (v001 PmRef Cpu2Tst 0x00003000 INTL 0x20050228) @
0x7fe74614
ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20050228) @ 0x7fe7456e
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050228) @ 0x7fe73185
ACPI: DSDT (v001 INTEL BEARLAKE 0x06040000 MSFT 0x03000000) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 7:7 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used
by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Detected 2660.130 MHz processor.
Built 1 zonelists. Total pages: 523888
Kernel command line: root=/dev/md2 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2072628k/2095552k available (1541k kernel code, 21636k reserved, 580k
data, 196k init, 1178048k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating
delay using timer specific routine.. 5323.93 BogoMIPS
(lpj=10647860)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0008e39d 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0008e39d
00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0008e39d
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision
20060707
CPU0: Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5320.33 BogoMIPS
(lpj=10640667)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0008e39d 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0008e39d
00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0008e39d
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz stepping 06
Total of 2 processors activated
(10644.26 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=32
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like
an initrd
Freeing initrd memory: 1720k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:11:04.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
PCI: Bridge:
0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: 2000-2fff
MEM window: de100000-de1fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
IO window: 3000-3fff
MEM window: de200000-de2fffff
PREFETCH window: disabled.
PCI: Ignore bogus resource 6 [0:0] of 0000:11:04.0
PCI: Bridge: 0000:00:1e.0
IO window: 4000-4fff
MEM window: de000000-de0fffff
PREFETCH window: dc000000-ddffffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.4 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency
timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
audit(1228778457.800:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI
capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
Allocate Port Service[0000:00:1c.4:pcie03]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
Allocate Port Service[0000:00:1c.5:pcie03]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a:
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Starting balanced_irq
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 1720KiB [1 disk] into ram disk... |/-\|/-\|<6>Time:
tsc clocksource has been installed.
/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
\|/-\|/-\|/-\|/-\|/-\|/-\done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 196k freed
md:
md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
md: raid1 personality registered for level 1
SCSI subsystem initialized
libata version 2.00 loaded.
_______________________________________________
Lug-bg mailing list
Lug-bg@xxxxxxxxxxxxxxxxxxhttp://linux-bulgaria.org/mailman/listinfo/lug-bg