|
|
lug-bg: Cisco & linux
- Subject: lug-bg: Cisco & linux
- From: stuckoff@xxxxxxxxxxxx (Stoian Mishev)
- Date: Thu, 13 Dec 2001 17:07:59 +0200
iskam da zakacha linux i cisco po serial port
pri linux-a (ttyS1) pri cisco-to (aux 0). razstoqnieto e okolo 100m zatowa
izpolzwam RS232/RS422 konvertori. znachi kogato se polzwa syshtata linia i se
zakachat USR Courier modemi zakacha bez nikakyw problem na momenta, no kato
zakacha direktno seriinite portowe ne stawa .. CISCO-to kazwa "CRC Error" ili
"receved packet is too large", nqokj prawil li e neshto podobno i ako da pls
da i prati kakwi sa nastrojkite na cisco-to i na pppd-to na linux box-a
CISCO 2620 running-config:
interface Async11
description LeasedLine
ip address 192.168.0.5 255.255.255.0
no ip directed-broadcast
ip nat outside
encapsulation ppp
ip tcp header-compression passive
dialer in-band
dialer idle-timeout 2147000
async default routing
async mode dedicated
peer default ip address 212.56.15.5
fair-queue 64 16 0
no cdp enable
line aux 0
autoselect during-login
autoselect ppp
login
transport input all
stopbits 1
speed 115200
Linux 2.2.19 pppd options:
pppd /dev/ttyS1 115200 192.168.0.1:192.168.0.5 netmask 255.255.255.0 noauth
proxyarp nodetach nocrtscts
btw. nqma znachenie kakyw e flowcontrola.
ako nqkoj e prawil neshto takowa pls help ;-)
--
Stoian Mishev
Internet Administraror, Dolphin-3 BG.
e-mail: stuckoff@xxxxxxxxxxxx
ICQ #: 5079105
GSM: +359-88-435168
===========================================================================
A mail-list of Linux Users Group - Bulgaria (bulgarian linuxers)
http://www.linux-bulgaria.org/ Hosted by Internet Group Ltd. - Stara Zagora
|
|
|